ghfhjkkghjllghj

Tag Archives: DOYMA Curaline

DOYMA Curaline® BKD 150/4006/K(2) and 150/4005/K(2)

DOYMA Curaline® BKD 150/4006/K(2)

DOYMA 25 Years Guarantee

Product benefits

  • quick and easy installation (with bayonet cap) through precise and coordinated combination of system cover and tightly bound seal packing with iron-cast fixed and loose flange
  • high variability thanks to large selection of system caps and additional partition valves
  • no reworking required
Technical details
  • gas-tight
  • flange sleeve with fixed and loose flange according to DIN 18 195
  • for buildings with tanking membranes or with bituminous thickcoating. Thin tanking membranes require two additional elastomeric packings according to DIN 18195 (DOYMA packings 1775)
  • suitable for cables 7 – 108 mm diameter
  • suitable to connect cable ducts ≤ 160 mm diameter
  • cables are sealed to system cap spigots using heat shrink sleeves as standard
  • compatible with existing duct systems
  • materials are ecologically friendly and highly resistant against chemicals
  • other variations, e.g. for renovations on the wall, are possible in combination with Curaflex® boards (technical specifications required)

 

Curaline® BKD 150/400x with fixed and loose flange is consists of:

  • flange sleeve (K = one-sided connection and K2 = two-sided connection), and depending on the requirement:
  • with fixed and loose flange against pressing water (BKD 150K(2)/4006)
  • with fixed and loose flange against non-pressing water (BKD 150K(2)/4005)

 

Detailed installation instructions enclosed with the product.

 

  • sealing system for penetrations
  • for buildings yet to be constructed
  • for buildings with tanking membranes or applications with bituminous thick-coating (black tank)
  • with bayonet action lock
  • suitable for cables and cable protection pipes
  • against pressing and non-pressing water
Curaline® BKD 150/4005/K2

Curaline® BKD 150/4005/K2 as double flange sleeve

Curaline® BKD 150/4006
Cable ext. diameter d [mm]Pipe sleeve internal diameter D1 [NB in mm]Fixed flange diameter D5 [mm]Standard length L [mm]
according to system cap150pressing water: 510200 - 500
Curaline® BKD 150/4005
Cable ext. diameter d [mm]Pipe sleeve internal diameter D1 [NB in mm]Fixed flange diameter D5 [mm]Standard length L [mm]
according to system cap150non-pressing water: 345200 - 500

All options are also available with double flange sleeve.

DOYMA Curaline® KD 110

Combination flange sleeve / system cap

Curaline® KD 110

  • sealing system for penetrations
  • for buildings yet to be constructed
  • to install in waterproof concrete (white tank)
  • with screw thread
  • suitable for cables and cable protection pipes
No. of spigots
(system cap)
Inside Ø of
spigot [mm]
cable-Ø
[mm]
1 80 26 – 78
1 100 34 – 98
3 46 16 – 44
7 4 x 25
3 x 32
7 – 23
12 – 30
Ld: 140 mm min.

Option

  • Flanged sleeve and
  • conical gasket insert WA/1 x 110
    • for connecting 110 mm external diameter cable duct
    • manufactured from highly durable EPDM elastomer

Option

  • Flanged sleeve and
  • gasket insert WA/Z x D for use instead of the Curaline® system cap and heat shrinking. A conical gasket insert WA, manufactured from highly durable EPDM elastomer, is available for retrofit sealing cables up to 110 mm external diameter. It is in split form to facilitate sealing of one or several cables already installed and is simply pushed into the sleeve and then secured in position by tightening the split collar using the articulated spanner.
Curaline® KD 110

DOYMA 25 Years Guarantee

Product benefits

  • simple installation (with screw connection) through precisefit and matched combination of system cover and seal packing
  • no reworking required
  • several sleeves with flanges can be assembled together in batteries when a multiplicity of cables is to be ducted.
  • the chamfered corners of the packings provide total control of the concrete compaction in the field of cable ducts.
  • high variability thanks to large selection of system caps and additional partition valves
  • by blind cap already in the installation gas- and watertight, even against pressing water

Leak Test: Fraunhofer

Technical details
  • gas-tight
  • screw thread for connecting system caps to sleeve flange
  • suitable for cables 7 – 98 mm diameter
  • cables are sealed to system cap spigots using heat shrink sleeves as standard
  • compatible with existing duct systems
  • materials are ecologically friendly and highly resistant against chemicals

 

The combination package consist of:

  • Flanged sleeve
    – supplied complete with protection plug and peel-off film
    – installed individually or in batteries
    – available for any wall thickness – fits flush within the shuttering
  • System caps
    – quick and simple attachment using screw fastening
    – have 1, 3 or 7 spigots
    – each with its own heat shrink sleeve

 

Product specification

Ordering example:
Single flange sleeve

(1)KD 110 – (2)K / (3)(L)

  1. System identification
  2. Sleeve with a flange on one end
  3. Wall thickness in mm

Ordering example:
Double flange sleeve assembled in a battery of 2 x 3 units

(1)KD 110 – (2)2 x (3)3 – (4)K 2 / (5)L

  1. System identification
  2. 2 sleeves one above the other
  3. 3 sleeves in a row
  4. Sleeve with a flange on both ends
  5. Wall thickness in mm

 

Ordering example:
Angled double flange sleeve in 45° position

(1)KD 110 – (2)S45 – (3)K 2 / (4)L

  1. System identification
  2. Sleeve in 45° position
  3. Sleeve with a flange on both ends
  4. Wall thickness in mm

Detailed installation instructions enclosed with the product.


Curaline KD 110 Assembling in batteries

KD 110-1×3-K2/(L) Ordering example: Single flange sleeve

KD 110 -K / (L)

Angled sleeve

Installation sketch for sleeve at 45° angle

Subject to technical alteration without notice


KD 110 Sleeves with flanges/system cap

Single flange sleeve suitable for installation of system caps or KSS system on one end, for min. wall thickness 60 mm. Correct direction of installation must be followed.

Order No.: KD 110-K/L

(L) = Wall thickness in mm

Double flange sleeve suitable for installation of system caps or KSS system on both ends, for min. wall thickness 140 mm.

Order No.: KD 110-K2/L

(L) = Wall thickness in mm

Angled sleeve for angled cable entry from any direction at 30°, 45° or 60° with installation form and polystyrene wedge, sleeve with a flange on one or both ends, also available as a multiple battery for min. wall thickness 250 mm.

Angled single sleeve

Order no.: KD 110-S30-K2/(L)
KD 110-S45-K2/(L)
KD 110-S60-K2/(L)

(L) = Wall thickness in mm

Conical gasket insert made from highly durable EPDM elastomer for sealing cables (Z) up to 110 mm dia. (D).

Order No.: KD 110-WA/ZxD

Conical gasket insert made from highly durable EPDM elastomer for connecting 110 mm outside dia. cable duct.

Order No.: KD 110-WA/1×110

System cap with plug in bushing to connect smooth-faced cable duct with 110 mm external diameter. An O-ring on the inside of the bushing provides the seal.

Order No.: KD 110-DSM 110

System cap with one spigot and accompanying heat-shrink sleeve, suitable for one cable.

Order No.: KD 110-D1/100 for cable: 34 – 98 mm

Order No.: KD 110-D1/80 for cable: 26 – 78 mm

System cap with three spigots and accompanying heat-shrink sleeves, suitable for 3 cables with diameter 16 – 44 mm.

Order No.: KD 110-D3/46

System cap with seven spigots 6 are open with accompanying heat-shrink sleeves and one is blanked off, suitable for 4 cables 7 – 23 mm diameter and 3 cables 12 – 30 mm diameter.

Order No.: KD 110-D7/32/25

System cap with cuff

Order No.: KD 110-DMM 75
KD 110-DMM 80
KD 110-DMM 110
KD 110-DMM 125


Additional protection plug: KD 110-D

KD 110 Accessories

3-finger shrouds (heat-shrink type) for sealing 3 cables in 1 spigot.

Order No.: AK 35-3F-12/2 for system cap KD 110D7/32/25 and cables 2 – 12 mm diameter

Order No.: AK 50-3F-22/5 for system cap KD 110-D3/46 and cables 5 – 22 mm diameter

4-finger shrouds (heat-shrink type) for sealing 4 cables in 1 spigot.

Order No.: AK 35-4F-13/2 for system cap KD 110-D7/32/25 and cables 2 – 13 mm diameter

Order No.: AK 50-4F-20/5 for system cap KD 110-D3/46 and cables 5 – 20 mm diameter

Blind plug VS seals unused spigots, removeable for retrofit installation of cables. Available for spigots 25, 32 and 46 mm diameter.

Order No.: VS 25 / VS 32 /VS 46

Melt-tape – SKB a self-fusing tape with excellent adhesive properties, tape thickness 1 mm, tape width 50 mm, roll length 3.00 m

Order ref.:SKB

Articulated spanner – GSS with adjustable arm for removal and assembly of sleeve protection plugs, system caps and KSS duct adaptors.

Order ref.:GSS

Square socket key – VMS for rapid removal and replacement of KD 110 sleeve protection plugs.

Order ref.:VMS

Set of heat-shrink sleeves Order No.: KD 110-TM Set-D8

Cold shrink sleeves on request.

DOYMA Curaline® GE building earthing

GE building earthing

DOYMA 25 Years Guarantee

Product benefits

  • suitable for potential balancing
  • maintenance-free

The DOYMA GE building earthing devices are available as sleeve, potential, insulation and retrofit grounding in rigid and flexible forms for many applications.

Technical details
  • high safety thanks to connection thread and connection bolts M12
  • gas-tight and watertight
  • hose-connected wall and ceiling installation
  • permanent labelling of the grounding
  • stainless steel design
  • deliverable in almost all construction length

 

System components

Retrofit sleeve earth GE-ND Rigid insulated sleeve for retrofit installation with connectors at each end (M12 bolts and cross clamp)Order-No.: GE-ND(standard length abt. 500 mm)
M12 connector Zinc plated mild steel (VZ) or grade 304 stainless steelOrder No.: GE-ABM 12
Earthing insulator GE-AB with 40 x 5 mm bar. Rigid earthing anchor with welded steel strap for welding connection to a reinforcement and for flush casting in with M12 connecting thread at one end. Standard length 70 mm, bar length 300 mm.Order No.: GE-AB
Earthing insulator GE-A/L Rigid earthing anchor for welding connection to a reinforcement and for flush casting in with M12 connecting thread at one end.Order No.: GE-A/L (L = wall thickness in mm)
Sleeve – potential earth GE-D-P/L Rigid sleeve with centrally welded cross clamp for flush casting in with M12 connecting thread at each end.Order No.: GE-D-P/L(L = wall thickness in mm)
Cable entry earth GE-D/L Rigid insulated sleeve for flush casting in with M12 connecting thread at each end.Order No.: GE-D/L(L = wall thickness in mm)
Potential-Earthing GE-P Rigid earthing anchor with welded cross clamp for connecting to earthing installation, conductors and reinforcements for flush casting in with M12 connecting thread at one end.Order No.: GE-P (standard length abt. 120 mm)
Flat to round connector Zinc plated mild steel (VZ) or grade 304 stainless steel.Order No.: GE-FRV

Subject to technical alteration without notice

  • building earthing for potential balancing for reinforcment and for retrofit installation in rigid or flexible design
Potential-Earthing GE-P
Potential-Earthing GE-P

Rigid earthing anchor with welded cross clamp for connecting to earthing installation, conductors and reinforcements for flush casting in with M12 connecting thread at one end.
Order No.: GE-P (standard length abt. 120 mm)

Earthing insulator GE-A/L
Earthing insulator GE-A/L

Rigid earthing anchor for welding connection to a reinforcement and for flush casting in with M12 connecting thread at one end.
Order No.: GE-A/L (L = wall thickness in mm)

Cable entry earth GE-D/L
Cable entry earth GE-D/L

Rigid insulated sleeve for flush casting in with M12 connecting thread at each end.
Order No.: GE-D/L (L = wall thickness in mm)

DOYMA Curaline® Vario

Curaline® Vario

DOYMA 25 Years Guarantee

Product benefits

  • simple installation due to precise dimensions, large sealing ranges
  • permanently sealed without re-tensioning (maintenance free)
  • higher sealing performance of the gasket insert due to DPS* and DOYMA-Grip
  • watertight welded bolts
  • with quick fastener
  • to be subsequently installed around the existing line
Technical details
  • gas-tight
  • accepts angular deviations of service duct up to 8°
  • accepts axial movements
  • double sealing
  • can be hinged
  • leak-proof against pressing water

 

The gasket insert consists of:

  • split frame rings:
    asymmetrically profiled steel rings (DPS), electro-galvanised, yellow passivated and sealant coated; optionally made of stainless steel grade 304 (1.4301) or grade 316 (1.4571/1.4404)
  • elastomer:
    2 x 27 mm EPDM seal rings (DOYMA-Grip), optionally EPDMPOD (for potable water), NBR (fuel/oil-resistant) or silicon (resistant to high temperatures) or FPM (chemical resistant)
  • 3 mm EPDM thick orange-coloured centre ring

 

Curaline® Vario Accessories:

  • Curaflex® 1710/1715 (Aquagard primer and special paint)
  • Curaflex® 1745 (Disboxid 444 coating)

Subject to technical alteration without notice

 

DOYMA Curaline® Vario

System through walls with gasket inserts

curaline vario technical drawing
  • sealing system for penetrations
  • to install in preinstalled pipe sleeve or core bore in waterproof concrete (white tank)
  • hinged version for retrofit installation
  • with changeable rubber insert
Cable ext. diameter d [mm] No. of pipes/ cables Pipe sleeve/core bore D1 [mm]
5 - 22 1 - 3 100
5 - 17 1 - 5
5 - 12 1 - 9
5 - 30 1 - 3 125
5 - 24 1 - 5
5 - 16 1 - 9
5 - 42 1 - 3 150
5 - 34 1 - 5
5 - 24 1 - 9
5 - 50 1 - 3 200
5 - 40 1 - 6
5 - 30 1 - 8
5 - 40 1
max: overall length: 85 mm

DOYMA Curaline® KSS cable duct system

Flexible cable duct system

Curaline® KSS

  • cable protection ducts for gas and water-tight installation of cables
  • simple connection with flange sleeves/system cabs
  • with bayonet action lock
  • possible installation as empty ducts for retrofit use
System Inside diameter
of duct [mm]
Bend radius Duct wall thickness
KSS B150 150 730 mm 7.8 mm
KSS 110 110 730 mm 5.8 mm
KSS B90 80 540 mm 5.0 mm

Curaline® KSS cable duct system

Product naming convention for KSS (example)

KSS B150/110/D/SM110/(L)

System name /
Inner width of the spiral coiled tube /
First side for example for the connection of a packing BKD 150 /
Second side for example with connection sleeve for the connection of a smooth walled pipe with an outside diameter of 110 mm /
(Total length in mm)

Curaline® KSS

DOYMA 25 Years Guarantee

Product benefits

  • high variability thanks to large selection of system caps and additional partition valves
  • easy to set the tube systems in concrete
  • compatible with prevalent systems
  • protects cable tubs and cables in event of earthmoving
  • easy to change cable assignment without hard earth work
Technical details
  • flexible, mechanically strong, load-bearing plastic spiral duct for conduits and cables
  • the wide range of system components ensures straightforward connection to all Curaline® systems at both ends, including flanged sleeves and core bores
  • ensures gas- and watertight connection to cable ducts and underground cables
  • compatible with existing duct systems
  • protects cable conduits and cables from ground movement
  • facilitates alterations and modifications to cable runs without costly ground works

 

KSS-Variations

  • KSS B150: used to connect to Curaline® BKD 150
  • KSS B90: used to connect to Curaline® BKD 90

 

Curaline® KSS cable duct system 2

Detailed installation instructions enclosed with the product.


KSS sleeves

Curaline® KSS cable duct system 3

KSS-sleeve, 80 mm Ø
KSS-sleeve, 110 mm Ø
KSS-sleeve, 125 mm Ø
KSS-sleeve, 150 mm Ø
Transition joints with sleeve technique

DOYMA Curaline® KSS cable duct system

ÜMM (cable-Ø 150 mm)
ÜMM (cable-Ø 125 mm)
ÜMM (cable-Ø 110 mm)
ÜMM (cable-Ø 80 mm)
Flange sleeve / K

Curaline® KSS cable flange

KSS-M 150-K-80
KSS-M 150-K-110
KSS-M 150-K-150
System cap / D

Curaline® KSS cable system cap

KSS-M 150-D-110
KSS-M 150-D-125
KSS-M 150-D-150
KSS M 90-D-80
Cap with multiple sockets

Curaline® KSS cable duct system 5

KSS-M 150-D3-110
KSS-M 150-D7-110
KSS-M 150-D3-150
KSS M 150-D8-150
KSS-M 90-D3-80
KSS M 90-D5-80

DOYMA Curaline® BKD 90

Combination flange sleeve / system cap

Curaline® BKD 90

  • sealing system for penetrations
  • for buildings yet to be constructed
  • to install in waterproof concrete (white tank)
  • with bayonet action lock
  • suitable for cables and cable protection pipes
No. of spigots
(system cap)
Inside Ø of
spigot [mm]
cable-Ø
[mm]
1 80 26 – 78
1 100 34 – 98
3 46 16 – 44
7 4 x 25
3 x 32
7 – 23
12 – 30
Ld: 140 mm min.

Option

  • Flanged sleeve and
  • conical gasket insert WA/1 x 110
    • for connecting 110 mm external diameter cable duct
    • manufactured from highly durable EPDM elastomer

Option

  • Flanged sleeve and
  • gasket insert WA/Z x D for use instead of the Curaline® system cap and heat shrinking. A conical gasket insert WA, manufactured from highly durable EPDM elastomer, is available for retrofit sealing cables up to 110 mm external diameter. It is in split form to facilitate sealing of one or several cables already installed and is simply pushed into the sleeve and then secured in position by tightening the split collar using the articulated spanner.

Curaline® BKD 90

DOYMA 25 Years Guarantee

Product benefits

  • quick and easy installation (with bayonet cap) through precise and coordinated combination of system cover and seal packing
  • no reworking required
  • several sleeves with flanges can be assembled together in batteries when a multiplicity of cables is to be ducted.
  • the chamfered corners of the packings provide total control of the concrete compaction in the field of cable ducts.
  • high variability thanks to large selection of system caps and additional partition valves
  • by blind cap already in the installation gas- and watertight, even against pressing water
Technical details
  • gas-tight
  • bayonet action lock for connecting system caps to sleeve flange
  • suitable for cables 7 – 73 mm diameter
  • cables are sealed to system cap spigots using heat shrink sleeves as standard
  • compatible with existing duct systems
  • materials are ecologically friendly and highly resistant against chemicals

 

The combination package consist of:

  • Flanged sleeve
    – supplied complete with protection plug and peel-off film
    – installed individually or in batteries
    – available for any wall thickness – fits flush within the shuttering
  • System caps
    – quick and simple attachment using bayonet action lock
    – have 1, 3 or 7 spigots
    – each with its own heat shrink sleeve

 

Product specification

Ordering example: Single flange sleeve

(1)BKD 90 – (2)K / (3)(L)

  1. System identification
  2. Sleeve with a flange on one end
  3. Wall thickness in mm

Ordering example: Double flange sleeve
assembled in a battery of 2 x 3 units

(1)BKD 90 – (2)2 x (3)3 – (4)K2 / (5)L

  1. System identification
  2. 2 sleeves one above the other
  3. 3 sleeves in a row
  4. Sleeve with a flange on both ends
  5. Wall thickness in mm

Ordering example: Angled double flange sleeve in 45° position

(1)BKD 90 – (2)S45 – (3)K2 / (4)L

  1. System identification
  2. Sleeve in 45° position
  3. Sleeve with a flange on both ends
  4. Wall thickness in mm
Curaline 90

Detailed installation instructions enclosed with the product.


Curaline BKD 90 Assembling in batteries

BKD 90-1×3-K2/(L)

BKD 90

BKD 90 -K / (L)

BKD 90 2

Angled sleeve

Installation sketch for sleeve at 45° angle

BKD 90 3

Subject to technical alteration without notice


Curaline® BKD 90 Sleeves with flanges/system caps

Single flange sleeve Double flange sleeve Angled sleeve
Single flange sleeve uitable for installation of system caps or KSS system on one end, for min. wall thickness 60 mm. Correct direction of installation must be followed.

Order No.: BKD 90-K/(L)

(L) = wall thickness in mm

Double flange sleeve suitable for installation of system caps or KSS system on both ends, for min. wall thickness 100 mm.

Order No.: BKD 90-K2/(L)

(L) = wall thickness in mm

Angled sleeve for angled cable entry from any direction at 30°, 45° or 60° with installation form and polystyrene wedge, sleeve with a flange on one or both ends, also available as a multiple battery for min. wall thickness 200 mm.

Angled single flange sleeve Order No.: BKD 90-S30-K/(L) BKD 90-S45-K/(L) BKD 90-S60-K/(L)

Angled double flange sleeve Order No.: BKD 90-S30-K2/(L) BKD 90-S45-K2/(L)BKD 90-S60-K2/(L)

(L) = wall thickness in mm

System cap with plug in bushing System cap with duct connection socket System cap with socket
System cap with plug in bushing to connect smooth-faced cable duct with 110 mm outside diameter. An O-ring on the inside of the coupling provides the seal.

Order No.: BKD 90-DSM 110

System cap with duct connection socket for connecting cable duct with 85 or 110 mm outside diameter. Accompanying heat-shrink sleeve provides the seal.

Order No.: BKD 90-DM 85
BKD 90-DM 110

System cap with socket, duct system with clamping collar

Order No.:BKD 90-DMM 75
BKD 90-DMM 85
BKD 90-DMM 110

System cap with one spigot System cap with three spigots BKD 90 44
System cap with one spigot and accompanying heat-shrink sleeve, suitable for one cable with diameter 26 – 73 mm.

Order No.: BKD 90-D1/75 Angled sleeve

System cap with three spigots and accompanying heat-shrink sleeves, suitable for three cables with diameter 7 – 28 mm.

Order No.: BKD 90-D3/30

System cap with five spigots and accompanying heat-shrink sleeves, suitable for five cables with max. 7 – 18 mm diameter.

Order No.: BKD 90-D5/20

BKD 90 56
Aluminium flange AF suitable for sealing in front of core bores in walls and floors. Supplied with flange packing, protection cap and installation accessories. For use with system caps or KSS system. Max. core bore diameter 85 mm. Flange size: 150 x 150 mm

Order No.: BKD 90-AF 150


BKD 90 Accessories

3-finger shrouds (heat-shrink type) for sealing 3 cables in 1 spigot.

Order No.: AK 35-3F-12/2 for system cap KD 110D7/32/25 and cables 2 – 12 mm diameter

Order No.: AK 50-3F-22/5 for system cap KD 110-D3/46 and cables 5 – 22 mm diameter

4-finger shrouds (heat-shrink type) for sealing 4 cables in 1 spigot.

Order No.: AK 35-4F-13/2 for system cap KD 110-D7/32/25 and cables 2 – 13 mm diameter

Order No.: AK 50-4F-20/5 for system cap KD 110-D3/46 and cables 5 – 20 mm diameter

Blind plug VS seals unused spigots, removeable for retrofit installation of cables. Available for spigots 25, 32 and 46 mm diameter.

Order No.: VS 25 / VS 32 /VS 46

Melt-tape – SKB a self-fusing tape with excellent adhesive properties, tape thickness 1 mm, tape width 50 mm, roll length 3.00 m

Order ref.:SKB

Articulated spanner – GSS with adjustable arm for removal and assembly of sleeve protection plugs, system caps and KSS duct adaptors.

Order ref.:GSS

Square socket key – VMS for rapid removal and replacement of KD 110 sleeve protection plugs.

Order ref.:VMS

Set of heat-shrink sleeves Order No.: KD 110-TM Set-D8

Cold shrink sleeves on request.

DOYMA Curaline® BKD 150

Combination flange sleeve / system cap

  • sealing system for penetrations
  • for buildings yet to be constructed
  • to install in waterproof concrete (white tank)
  • with bayonet action lock
  • suitable for cables and cable protection pipes
No. of spigots
(system cap)
Inside Ø of
spigot [mm]
cable-Ø [mm]
1 110 34 – 108
3 60 21 – 56
8 4 x 25 4 x 35 7 – 23 12 – 33
Ld: 140 mm min.

DOYMA Curaline® BKD 150

DOYMA 25 Years Guarantee

Product benefits

  • quick and easy installation (with bayonet cap) through precise and coordinated combination of system cover and seal packing
  • no reworking required
  • several sleeves with flanges can be assembled together in batteries when a multiplicity of cables is to be ducted.
  • the chamfered corners of the packings provide total control of the concrete compaction in the field of cable ducts.
  • high variability thanks to large selection of system caps and additional partition valves
  • by blind cap already in the installation gas- and watertight, even against pressing water

Leak Test: Fraunhofer

Technical details
  • gas-tight
  • suitable for cables 7 – 108 mm diameter
  • suitable to connect cable ducts ≤ 160 mm diameter
  • cables are sealed to system cap spigots using heat shrink sleeves as standard
  • compatible with existing duct systems
  • materials are ecologically friendly and highly resistant against chemicals

 

The combination package consist of:

  • Flanged sleeve
    – supplied complete with protection plug and peel-off film
    – installed individually or in batteries
    – available for any wall thickness – fits flush within the shuttering
  • System caps
    – quick and simple attachment using bayonet action lock
    – have 1, 3 or 8 spigots
    – each with its own heat shrink sleeve

 

Product specification

Ordering example:
Single flange sleeve with bayonet action lock

(1)BKD 150 – (2)K / (3)(L)

  1. System identification
  2. Sleeve with a flange on one end
  3. Wall thickness in mm

 

Ordering example:
Double flange sleeve with bayonet action lock assembled in a battery of 2 x 3 units

(1)BKD 150 – (2)2 x (3)3 –(4)K 2 / (5)L

  1. System identification
  2. 2 sleeves one above the other
  3. 3 sleeves in a row
  4. Sleeve with a flange on both ends
  5. Wall thickness in mm

 

Ordering example:
Angled double flange sleeve in 45° position with bayonet action lock

(1)BKD 150 – (2)S45 – (4)K 2 / (4)L

  1. System identification
  2. Sleeve in 45° position
  3. Sleeve with a flange on both ends
  4. Wall thickness in mm

Detailed installation instructions enclosed with the product.


Curaline BKD 150 Assembling in batteries

BKD 150-1×3-K2/(L)


BKD 150-2×3-K2/(L)

Angled sleeve

Installation sketch for sleeve at 45° angle

Subject to technical alteration without notice


Curaline BKD 150 Sleeves with flanges/system caps

Single flange sleeve suitable for installation of system caps or KSS system on one end, for min. wall thickness 60 mm. Correct direction of installation must be followed.

Order No.: BKD 150-K/L

(L) = wall thickness in mm

Double flange sleeve suitable for installation of system caps or KSS system on both ends, for min. wall thickness 140 mm.

Order No.: BKD 150-K2/L

(L) = wall thickness in mm

Angled sleeve for angled cable entry from any direction at 30°, 45° or 60°, with installation form and polystyrene wedge, sleeve with a flange on one or both ends, also available as a multiple battery for min. wall thickness 250 mm. Angled single flange sleeve.

Order No.: BKD 150-S30-K/(L)
BKD 150-S45-K/(L)
BKD 150-S60-K/(L)

Angled double flange sleeve

Order No.: BKD 150-S30-K2/(L)
BKD 150-S45-K2/(L)
BKD 150-S60-K2/(L)

(L) = wall thickness in mm

Aluminium flange AF suitable for sealing in front of core bores in walls and floors. Supplied with flange packing, protection cap and installation accessories. For use with system caps or KSS system. Max. core bore diameter 150 mm. Flange size: 235 x 235 mm

Order No.: BKD 150-AF 235

System cap with spigot coupling to adapt smooth-faced cable ducts with 110, 125, 140 or 160 mm outside diameter. An O-ring on the inside of the coupling provides the seal.

Order No.: BKD 150-DSM 110
BKD 150-DSM 125
BKD 150-DSM 140
BKD 150-DSM 160

System cap with duct connection socket for connecting smooth-faced cable ducts with 125, 140 or 160 mm outside diameter. Accompanying heat-shrink sleeve provides the seal.

Order No.: BKD 150-DM 125
BKD 150-DM 140
BKD 150-DM 160

System cap with one spigot and accompanying heat-shrink sleeve, suitable for one cable 34 – 108 mm diameter.

Order No.: BKD 150-D1/110

Cables and cable ducts with max. 110 mm external diameter can be sealed using heat shrink sleeves.

System cap with three spigots and accompanying heat-shrink sleeves, suitable for 3 cables 21 – 56 mm diameter.

Order No.: BKD 150-D3/60

System cap with eight spigots four are open with accompanying heat-shrink sleeves and four are blanked off, suitable for 4 cables 7 – 23 mm diameter and 4 cables 12 – 33 mm diameter.

Order No.: BKD 150-D8/35/25

 


 

Curaline BKD 150 Accessories

3-finger shrouds (heat-shrink type) for sealing 3 cables in 1 spigot.

Order No.: AK 35-3F-12/2 for system cap BKD 150D8/35/25 and cables 2 – 12 mm diameter

Order No.: AK 50-3F-22/5 for system cap BKD 150D8/35/25 and cables 5 – 22 mm diameter

Order No.: AK 75-3F-29/8 for system cap BKD 150-D3/60 and cables 8 – 29 mm diameter

4-finger shrouds (heat-shrink type) for sealing 4 cables in 1 spigot.

Order No.: AK 35-4F-13/2 for system cap BKD 150D8/35/25 and cables 2 – 13 mm diameter

Order No.: AK 50-4F-20/5 for system cap BKD 150D8/35/25 and cables 5 – 20 mm diameter

Order No.: AK 75-4F-29/8 for system cap BKD 150-D3/60 and cables 8 – 29 mm diameter

Blind plug VS seals unused spigots, removeable for retrofit installation of cables. Available for spigots 25, 35 and 60 mm diameter.

Order No.: VS 25 / VS 35 / VS 60

Melt tape – SKB a self-fusing tape with excellent adhesive properties tape thickness 1 mm, tape width 50 mm, roll length 3.00 m

Order ref.: SKB

Articulated spanner – GSS with adjustable arm for removal and assembly of sleeve protection plugs, system caps and KSS duct adaptors.

Order ref.: GSS

Square socket key – VMS for rapid removal and replacement of BKD 150 sleeve protection plugs.

Order ref.: VMS

Set of heat shrink sleeves Order No.: BKD 150-TM Set-DB

Cold shrink sleeves upon request.