DOYMA Curaline® BKD 90

Combination flange sleeve / system cap

Curaline® BKD 90

  • sealing system for penetrations
  • for buildings yet to be constructed
  • to install in waterproof concrete (white tank)
  • with bayonet action lock
  • suitable for cables and cable protection pipes
No. of spigots
(system cap)
Inside Ø of
spigot [mm]
cable-Ø
[mm]
1 80 26 – 78
1 100 34 – 98
3 46 16 – 44
7 4 x 25
3 x 32
7 – 23
12 – 30
Ld: 140 mm min.

Option

  • Flanged sleeve and
  • conical gasket insert WA/1 x 110
    • for connecting 110 mm external diameter cable duct
    • manufactured from highly durable EPDM elastomer

Option

  • Flanged sleeve and
  • gasket insert WA/Z x D for use instead of the Curaline® system cap and heat shrinking. A conical gasket insert WA, manufactured from highly durable EPDM elastomer, is available for retrofit sealing cables up to 110 mm external diameter. It is in split form to facilitate sealing of one or several cables already installed and is simply pushed into the sleeve and then secured in position by tightening the split collar using the articulated spanner.

Curaline® BKD 90

DOYMA 25 Years Guarantee

Product benefits

  • quick and easy installation (with bayonet cap) through precise and coordinated combination of system cover and seal packing
  • no reworking required
  • several sleeves with flanges can be assembled together in batteries when a multiplicity of cables is to be ducted.
  • the chamfered corners of the packings provide total control of the concrete compaction in the field of cable ducts.
  • high variability thanks to large selection of system caps and additional partition valves
  • by blind cap already in the installation gas- and watertight, even against pressing water
Technical details
  • gas-tight
  • bayonet action lock for connecting system caps to sleeve flange
  • suitable for cables 7 – 73 mm diameter
  • cables are sealed to system cap spigots using heat shrink sleeves as standard
  • compatible with existing duct systems
  • materials are ecologically friendly and highly resistant against chemicals

 

The combination package consist of:

  • Flanged sleeve
    – supplied complete with protection plug and peel-off film
    – installed individually or in batteries
    – available for any wall thickness – fits flush within the shuttering
  • System caps
    – quick and simple attachment using bayonet action lock
    – have 1, 3 or 7 spigots
    – each with its own heat shrink sleeve

 

Product specification

Ordering example: Single flange sleeve

(1)BKD 90 – (2)K / (3)(L)

  1. System identification
  2. Sleeve with a flange on one end
  3. Wall thickness in mm

Ordering example: Double flange sleeve
assembled in a battery of 2 x 3 units

(1)BKD 90 – (2)2 x (3)3 – (4)K2 / (5)L

  1. System identification
  2. 2 sleeves one above the other
  3. 3 sleeves in a row
  4. Sleeve with a flange on both ends
  5. Wall thickness in mm

Ordering example: Angled double flange sleeve in 45° position

(1)BKD 90 – (2)S45 – (3)K2 / (4)L

  1. System identification
  2. Sleeve in 45° position
  3. Sleeve with a flange on both ends
  4. Wall thickness in mm
Curaline 90

Detailed installation instructions enclosed with the product.


Curaline BKD 90 Assembling in batteries

BKD 90-1×3-K2/(L)

BKD 90

BKD 90 -K / (L)

BKD 90 2

Angled sleeve

Installation sketch for sleeve at 45° angle

BKD 90 3

Subject to technical alteration without notice


Curaline® BKD 90 Sleeves with flanges/system caps

Single flange sleeve Double flange sleeve Angled sleeve
Single flange sleeve uitable for installation of system caps or KSS system on one end, for min. wall thickness 60 mm. Correct direction of installation must be followed.

Order No.: BKD 90-K/(L)

(L) = wall thickness in mm

Double flange sleeve suitable for installation of system caps or KSS system on both ends, for min. wall thickness 100 mm.

Order No.: BKD 90-K2/(L)

(L) = wall thickness in mm

Angled sleeve for angled cable entry from any direction at 30°, 45° or 60° with installation form and polystyrene wedge, sleeve with a flange on one or both ends, also available as a multiple battery for min. wall thickness 200 mm.

Angled single flange sleeve Order No.: BKD 90-S30-K/(L) BKD 90-S45-K/(L) BKD 90-S60-K/(L)

Angled double flange sleeve Order No.: BKD 90-S30-K2/(L) BKD 90-S45-K2/(L)BKD 90-S60-K2/(L)

(L) = wall thickness in mm

System cap with plug in bushing System cap with duct connection socket System cap with socket
System cap with plug in bushing to connect smooth-faced cable duct with 110 mm outside diameter. An O-ring on the inside of the coupling provides the seal.

Order No.: BKD 90-DSM 110

System cap with duct connection socket for connecting cable duct with 85 or 110 mm outside diameter. Accompanying heat-shrink sleeve provides the seal.

Order No.: BKD 90-DM 85
BKD 90-DM 110

System cap with socket, duct system with clamping collar

Order No.:BKD 90-DMM 75
BKD 90-DMM 85
BKD 90-DMM 110

System cap with one spigot System cap with three spigots BKD 90 44
System cap with one spigot and accompanying heat-shrink sleeve, suitable for one cable with diameter 26 – 73 mm.

Order No.: BKD 90-D1/75 Angled sleeve

System cap with three spigots and accompanying heat-shrink sleeves, suitable for three cables with diameter 7 – 28 mm.

Order No.: BKD 90-D3/30

System cap with five spigots and accompanying heat-shrink sleeves, suitable for five cables with max. 7 – 18 mm diameter.

Order No.: BKD 90-D5/20

BKD 90 56
Aluminium flange AF suitable for sealing in front of core bores in walls and floors. Supplied with flange packing, protection cap and installation accessories. For use with system caps or KSS system. Max. core bore diameter 85 mm. Flange size: 150 x 150 mm

Order No.: BKD 90-AF 150


BKD 90 Accessories

3-finger shrouds (heat-shrink type) for sealing 3 cables in 1 spigot.

Order No.: AK 35-3F-12/2 for system cap KD 110D7/32/25 and cables 2 – 12 mm diameter

Order No.: AK 50-3F-22/5 for system cap KD 110-D3/46 and cables 5 – 22 mm diameter

4-finger shrouds (heat-shrink type) for sealing 4 cables in 1 spigot.

Order No.: AK 35-4F-13/2 for system cap KD 110-D7/32/25 and cables 2 – 13 mm diameter

Order No.: AK 50-4F-20/5 for system cap KD 110-D3/46 and cables 5 – 20 mm diameter

Blind plug VS seals unused spigots, removeable for retrofit installation of cables. Available for spigots 25, 32 and 46 mm diameter.

Order No.: VS 25 / VS 32 /VS 46

Melt-tape – SKB a self-fusing tape with excellent adhesive properties, tape thickness 1 mm, tape width 50 mm, roll length 3.00 m

Order ref.:SKB

Articulated spanner – GSS with adjustable arm for removal and assembly of sleeve protection plugs, system caps and KSS duct adaptors.

Order ref.:GSS

Square socket key – VMS for rapid removal and replacement of KD 110 sleeve protection plugs.

Order ref.:VMS

Set of heat-shrink sleeves Order No.: KD 110-TM Set-D8

Cold shrink sleeves on request.