DOYMA Curaline® BKD 150

Combination flange sleeve / system cap

  • sealing system for penetrations
  • for buildings yet to be constructed
  • to install in waterproof concrete (white tank)
  • with bayonet action lock
  • suitable for cables and cable protection pipes
No. of spigots
(system cap)
Inside Ø of
spigot [mm]
cable-Ø [mm]
1 110 34 – 108
3 60 21 – 56
8 4 x 25 4 x 35 7 – 23 12 – 33
Ld: 140 mm min.
DOYMA Curaline® BKD 150

DOYMA 25 Years Guarantee

Product benefits

  • quick and easy installation (with bayonet cap) through precise and coordinated combination of system cover and seal packing
  • no reworking required
  • several sleeves with flanges can be assembled together in batteries when a multiplicity of cables is to be ducted.
  • the chamfered corners of the packings provide total control of the concrete compaction in the field of cable ducts.
  • high variability thanks to large selection of system caps and additional partition valves
  • by blind cap already in the installation gas- and watertight, even against pressing water

Leak Test: Fraunhofer

Technical details
  • gas-tight
  • suitable for cables 7 – 108 mm diameter
  • suitable to connect cable ducts ≤ 160 mm diameter
  • cables are sealed to system cap spigots using heat shrink sleeves as standard
  • compatible with existing duct systems
  • materials are ecologically friendly and highly resistant against chemicals

 

The combination package consist of:

  • Flanged sleeve
    – supplied complete with protection plug and peel-off film
    – installed individually or in batteries
    – available for any wall thickness – fits flush within the shuttering
  • System caps
    – quick and simple attachment using bayonet action lock
    – have 1, 3 or 8 spigots
    – each with its own heat shrink sleeve

 

 

Product specification

 

Ordering example:
Single flange sleeve with bayonet action lock

(1)BKD 150 – (2)K / (3)(L)

  1. System identification
  2. Sleeve with a flange on one end
  3. Wall thickness in mm

Ordering example:
Double flange sleeve with bayonet action lock assembled in a battery of 2 x 3 units

(1)BKD 150 – (2)2 x (3)3 –(4)K 2 / (5)L

  1. System identification
  2. 2 sleeves one above the other
  3. 3 sleeves in a row
  4. Sleeve with a flange on both ends
  5. Wall thickness in mm

Ordering example:
Angled double flange sleeve in 45° position with bayonet action lock

(1)BKD 150 – (2)S45 – (4)K 2 / (4)L

  1. System identification
  2. Sleeve in 45° position
  3. Sleeve with a flange on both ends
  4. Wall thickness in mm

Detailed installation instructions enclosed with the product.


Curaline BKD 150 Assembling in batteries

BKD 150-1×3-K2/(L)


BKD 150-2×3-K2/(L)

Angled sleeve

Installation sketch for sleeve at 45° angle

Subject to technical alteration without notice


Curaline BKD 150 Sleeves with flanges/system caps

Single flange sleeve suitable for installation of system caps or KSS system on one end, for min. wall thickness 60 mm. Correct direction of installation must be followed.

Order No.: BKD 150-K/L

(L) = wall thickness in mm

Double flange sleeve suitable for installation of system caps or KSS system on both ends, for min. wall thickness 140 mm.

Order No.: BKD 150-K2/L

(L) = wall thickness in mm

Angled sleeve for angled cable entry from any direction at 30°, 45° or 60°, with installation form and polystyrene wedge, sleeve with a flange on one or both ends, also available as a multiple battery for min. wall thickness 250 mm. Angled single flange sleeve.

Order No.: BKD 150-S30-K/(L)
BKD 150-S45-K/(L)
BKD 150-S60-K/(L)

Angled double flange sleeve

Order No.: BKD 150-S30-K2/(L)
BKD 150-S45-K2/(L)
BKD 150-S60-K2/(L)

(L) = wall thickness in mm

Aluminium flange AF suitable for sealing in front of core bores in walls and floors. Supplied with flange packing, protection cap and installation accessories. For use with system caps or KSS system. Max. core bore diameter 150 mm. Flange size: 235 x 235 mm

Order No.: BKD 150-AF 235

System cap with spigot coupling to adapt smooth-faced cable ducts with 110, 125, 140 or 160 mm outside diameter. An O-ring on the inside of the coupling provides the seal.

Order No.: BKD 150-DSM 110
BKD 150-DSM 125
BKD 150-DSM 140
BKD 150-DSM 160

System cap with duct connection socket for connecting smooth-faced cable ducts with 125, 140 or 160 mm outside diameter. Accompanying heat-shrink sleeve provides the seal.

Order No.: BKD 150-DM 125
BKD 150-DM 140
BKD 150-DM 160

System cap with one spigot and accompanying heat-shrink sleeve, suitable for one cable 34 – 108 mm diameter.

Order No.: BKD 150-D1/110

Cables and cable ducts with max. 110 mm external diameter can be sealed using heat shrink sleeves.

System cap with three spigots and accompanying heat-shrink sleeves, suitable for 3 cables 21 – 56 mm diameter.

Order No.: BKD 150-D3/60

System cap with eight spigots four are open with accompanying heat-shrink sleeves and four are blanked off, suitable for 4 cables 7 – 23 mm diameter and 4 cables 12 – 33 mm diameter.

Order No.: BKD 150-D8/35/25


Curaline BKD 150 Accessories

3-finger shrouds (heat-shrink type) for sealing 3 cables in 1 spigot.

Order No.: AK 35-3F-12/2 for system cap BKD 150D8/35/25 and cables 2 – 12 mm diameter

Order No.: AK 50-3F-22/5 for system cap BKD 150D8/35/25 and cables 5 – 22 mm diameter

Order No.: AK 75-3F-29/8 for system cap BKD 150-D3/60 and cables 8 – 29 mm diameter

4-finger shrouds (heat-shrink type) for sealing 4 cables in 1 spigot.

Order No.: AK 35-4F-13/2 for system cap BKD 150D8/35/25 and cables 2 – 13 mm diameter

Order No.: AK 50-4F-20/5 for system cap BKD 150D8/35/25 and cables 5 – 20 mm diameter

Order No.: AK 75-4F-29/8 for system cap BKD 150-D3/60 and cables 8 – 29 mm diameter

Blind plug VS seals unused spigots, removeable for retrofit installation of cables. Available for spigots 25, 35 and 60 mm diameter.

Order No.: VS 25 / VS 35 / VS 60

Melt tape – SKB a self-fusing tape with excellent adhesive properties tape thickness 1 mm, tape width 50 mm, roll length 3.00 m

Order ref.: SKB

Articulated spanner – GSS with adjustable arm for removal and assembly of sleeve protection plugs, system caps and KSS duct adaptors.

Order ref.: GSS

Square socket key – VMS for rapid removal and replacement of BKD 150 sleeve protection plugs.

Order ref.: VMS

Set of heat shrink sleeves Order No.: BKD 150-TM Set-DB

Cold shrink sleeves upon request.