- simple installation due to precise dimensions, large sealing ranges
- permanently leakproof without retensioning (maintenance free)
- higher sealing performance of the gasket insert due to DPS* and DOYMA-Grip
- system component, without steps or divisions
- ring with watertight welded bolts
- manufactured according to specifications
- accepts angular deviations of service duct up to 8°
- accepts axial movements
- single sealing
The gasket insert consists of:
- frame rings:
asymmetrically profiled steel rings (DPS*), electro-galvanised, yellow passivated and sealant coated; optionally made of stainless steel grade 304 (1.4301) or grade 316 (1.4571/1.4404)
27 mm EPDM seal ring (DOYMA-Grip), optionally EPDM-POD (for potable water), NBR (fuel/oil-resistant) or silicon (resistant to high temperatures) or FPM (chemical resistant)
- Curaflex® 1710/1715 (Aquagard primer and special paint)
- Curaflex® 1745 (Disboxid 444 coating)
Installation as shown above.
Tighten nuts diagonally opposite nuts.
Please observe max. torque values.
Detailed installation instructions enclosed with the product.
|Nuts||Socket spanner||Max. torque value|
|M 5||8||3 Nm|
|M 6||10||8 Nm|
|M 8||13||12 Nm|
|M 10||17||25 Nm|