DOYMA Curaflam® Inject BS+K10

Curaflam® Inject BS+K10

DOYMA 25 Years Guarantee

Product benefits

  • very clean processing
  • standard cartridge gun can be used
  • high yield, flexible application

DIBt: Z-19.11-1607

Fire protection mass to seal pipes and cables
1: Use as per German Specimen Wiring Systems Directive (MLAR) 03/00 and 11/05 for:
  • individual electrical cables, e.g. power cables, telephone cables, ICT cables, fibre optic cables
  • flammable pipes up to OD ≤ 32 mm, e.g. B. PB, PE, PVC, composite pipes, empty conduits for electrical cables
  • non-flammable pipes up to OD ≤ 160 mm, e.g. copper, steel, cast iron
  • joints in fire-resistant components
2: Use as per P-3138/0325 – MPA BS test certificate for:
  • steel / stainless steel pipes with OD ≤ 88.9 mm
  • copper pipes with OD ≤ 54 mm
  • synthetic rubber insulation, insulating material thickness ≤ 56 mm
3: Use as per 4185/2014 expert report for
  • sealing of annulus gaps / gaps between Conlit casing and wall/ ceiling, clearance ≤ 50 mm
  • sealing of annulus gaps / gaps with complete mineral wool insulation wall / ceiling, clearance ≤ 50 mm
Firestops for pipes / cables
  • simple-to-use cartridge material
  • firestop as per LAR/RbALei
pipe external diameter [mm] 1 - 32 33 - 63 64 - 110 111 - 160
Approx. material consumption (filled 10 mm on both sides, annulus 25 mm) ca. 1/4 cartridge ca. 1/2 cartridge ca. 3/4 cartridge ca. 1 cartridge

Contents: 300 ml / cartridge

Conditions of use:
  • the pipes are fed through walls / ceilings with thickness ≥ 80 mm. Can also be used for light partition walls, with non-flammable protection tubes
  • the spacing regulations of the MLAR 03/2000 and 11/05 must be complied with.
Licensing / test certificates:

Curaflam® Inject BSK10 is licensed by the Deutsches Institut für Bautechnik (DIBt) Z-19.11-1607.

Note: Detailed information about the fields of use and purpose of the design can be found in the General Technical Approval (abZ) or General Appraisal Certificate (abP) of the product.